|
NICKEL 200
|
Commercial pure
wrought Nickel for the construction of chemical
plant |
|
NICKEL 201
|
A law-carbon
grade of nickel free from the stress- corrosion
cracking associated with graphitisation in
chemical plant operating at temperatures above
3000 C, e.g. castic soda plant. |
|
NICKEL 205
|
A high-purity
nickel for anodes, plants and grids of electronic
valves and for megnetostrictive transducers.
|
|
NICKEL 212
|
Slightly
stiffer than pure nickel, used for electrode
support wires in radio valves and tungsten
filament lamps. |
|
NICKEL 222
|
A cathode
nickel for the sleeves of indirectly heated,
oxide-coated cathodes in radio valves.
|
|
NICKEL 270
|
A high-purity
nickel with a minimum temperature - coefficient of
resistant of 0.0060c over the range 0.1000C. Made
by the powder metallurgy process. Used for
components of special valves., such as hydrogen
thyratons and for electric resistance thermometers
and controls. |
|
MONEL alloy 400
|
A general
engineering alloy with good resistance to
corrosion by sea water, sulphuric, hydrochloric
and phosphoric acids, pharmaceutial products,
ammonium sulphate, fatty acids, etc. It retains
its strength and toughness up to about 45000c and
is used for chemical, steam and petroleum plant,
marine and pickling equipment, |
|
MONEL
alloysK-500 |
An alloy with
similar corrosion-resistance to MONEL alloy 400
but amenable to precipitation hardening to give
high strength. Used for propeller and pump shafts,
bolts, doctor blades and valve spindles.
|
|
CAST MONEL
alloys |
Cast alloy pig
supplied for foundry addition to silicon. For
corrosion-resistance castings. |
|
INCONEL alloy
600 |
This alloy has
excellent mechanical properties and
oxidation-resistance at high temperatures. It is
used for furnace parts, heat-treatment equipment,
heating element sheating in nuclear engineering
and in the construction of chemical plant.
|
|
INCONEL alloy
625 |
An alloy with
high strength and toughness from cryogenic
temperatures to 1000C in addition to good
oxidation-resistance. It resist attack by other
media and is virtually immune to chlo ride-stress
corrotion cracking. It is used in aerospace and is
being evaluated for chemical and marine
engineering. |
|
INCOLOY alloy
800 |
This alloy
resist hydrogen/hydrogen sulphide corrosion and
chlorides stress corrosion cracking. It is based
for pigtails and headers and hydrocarbon “cracker”
tubes for other high-temperature processing
equipment. |
|
INCOLOY alloy
825 |
This product
resist corrosion by acids and alkalies in either
reducing or oxidising conditions. It is resistant
to stress-corrosion cracking and pitting and used
for chemical plant and pickling plant. A nickel
iron cobalt alloy combining a low coefficient of
expansion and higher inflexion temperature with
higher strength than is usual in this composition
range. It is being evaluated for such applications
as diesel engine piston crowns compensating
members in gas turbine engines and controlled
clearance rotating machinery parts. |
|
INCOLOY alloy
Ds |
A general
purpose heat resisting alloy with particular
resistance to carburisation and alternating
carburisation and oxdition. It is used for furnace
parts, heat treatment and vitreous enamelling
equipment. |
|
|
|
|
|
 |
